Routing TCP/IP Volume I<br><br>ISBN: 1-57870-041-8<br>Cisco Press<br><br>Errata<br><br><br><br><br>7th Printing<br><br><br><br><br>Page 106 – The last two lines of the configuration following ‘To crate the floating static route, Piglet's route entries are as follows:’ should read:<br><br> ip route 10.1.30.0 255.255.255.0 10.1.10.2<br><br> ip route 10.1.30.0 255.255.255.0 10.1.20.2 50<br><br><br><br><br><br><br><br>6th Printing<br><br><br><br><br>Page 180 – Regarding the Table 4.3, In the first row (in which the Description begins with "(RA,RD,4) and (RA,RE,4) are both...", in the "Candidate" column, the entry "RD,RE,3" should have a line through it (note several other lined-out entries in the same column throughout Table 4.3).<br><br><br><br><br> In the second row, in which the Description begins, "(RF,RE,1) is added to..." the Description should be changed to "(RA,RE,4) is added to...". .<br><br><br><br><br> There is a dividing line missing between the second and third rows. That is between the row described above and the row with the Description beginning "(RC,RF,2) is added to..."<br><br><br><br><br> In the fourth row, with the single entry of "RF,RH,4" in the "Candidate" column, there is a missing integer of 9 that should appear in the "Cost to Root" column.<br><br><br><br><br><br><br><br>1st Printing<br><br><br><br><br>Page 222 - Regarding Figure 5-18, Change the bottom configuration of router ‘RTB’ from “192.168.2.97/27” to read “192.168.2.94”.<br><br><br><br><br>Page 484 – Regarding Table 9.5, the column titled ‘3&4’ and the row titled ‘Stub’, the entry should be ‘No*’ <br><br><br><br><br>Page 636 – Under the heading, ‘IP Interface Address CLV’, the second sentence should read, “Because the Length field is one octet, an interface of an IS-IS router can theoretically have up to 63 IP addresses”. <br><br><br> |