<p><br/><font color="#f70938">r3#sh frame-relay map<br/></font>Serial1/0 (up): ip 192.168.10.1 dlci 201(0xC9,0x3090), dynamic,<br/> broadcast,, status defined, active<br/>Serial1/0 (up): ip 192.168.10.3 dlci 201(0xC9,0x3090), dynamic,<br/> broadcast,, status defined, active<br/>r3#</p><p></p><p><font color="#ff0033">r1# sh frame-relay map<br/></font>Serial1/1 (up): ip 192.168.10.2 dlci 102(0x66,0x1860), dynamic,<br/> broadcast,, status defined, active<br/>Serial1/1 (up): ip 192.168.10.3 dlci 102(0x66,0x1860), static,<br/> broadcast,<br/> CISCO, status defined, active</p><p></p><p><br/><font color="#f70968">r4#sh frame-relay map<br/></font>Serial1/1 (up): ip 192.168.10.1 dlci 103(0x67,0x1870), static,<br/> broadcast,<br/> CISCO, status defined, active<br/>Serial1/1 (up): ip 192.168.10.2 dlci 103(0x67,0x1870), dynamic,<br/> broadcast,, status defined, active<br/>r4#sh frame<br/>r4#sh frame-relay pvc</p><p>PVC Statistics for interface Serial1/1 (Frame Relay DTE)</p><p> Active Inactive Deleted Static<br/> Local 1 0 0 0<br/> Switched 0 0 0 0<br/> Unused 0 0 0 0</p><p>DLCI = 103, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/1</p><p> input pkts 67 output pkts 1 in bytes 2278<br/> out bytes 34 dropped pkts 0 in pkts dropped 0<br/> out pkts dropped 0 out bytes dropped 0<br/> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0<br/> out BECN pkts 0 in DE pkts 0 out DE pkts 0<br/> out bcast pkts 1 out bcast bytes 34<br/> pvc create time 01:06:43, last time pvc status changed 01:06:33<br/>r4# ping 192.168.10.1</p><p>Type escape sequence to abort.<br/>Sending 5, 100-byte ICMP Echos to 192.168.10.1, timeout is 2 seconds:<br/>.....<br/>Success rate is 0 percent (0/5)<br/>r4#<br/></p><p></p><p></p><p> <font color="#ee1169" size="7"> R4 PING不通 R1 谢过了!!!!!!!!!!!!!!!!!</font></p><p><br/><br/><br/></p> |