2010最新模拟器GNS 3 0.7.3 下载（含其他Dynamips、Qemu、PEMU模拟器）

fybsll

2010最新模拟器GNS 3 0.7.3 下载（含其他Dynamips、Qemu、PEMU模拟器）

2010最新模拟器GNS 3 0.7.3 下载

GNS3 0.7.3 is released!                          
After many months GNS3 0.7.3 is finally released! This is a major version including lot of changes and bug fixes as well as an improved GUI consistency.

It is recommended to uninstall your previous version of GNS3 before installing this one because there is a possibility of side effects when keeping an old GNS3 settings file (gns3.ini).

Here is a list of the changes:

Easily change the symbol of one or several nodes (** a node, then right click -> Change symbol).
A docked window to see on what device interface captures are running (View -> Docks -> Captures). You can stop capturing or start Wireshark using this view.
Only the necessary files (nvram, flash, disks etc.) are copied or kept when creating projects and snapshots.
Preventing unsaved interface labels to show up after loading a topology. This can be reset using the "show interface labels" button.
Improvements for ATM and Frame Relay switches: proper naming, dynamic mapping support and it is not needed to remove a link to change its DLCI/VC mapping.
PCAP capture support for Qemu based devices (Qemu host, JunOS ASA, PIX, IDS). This option cannot be used after the **ed device is started.
Fixed many issues with the snapshot feature. Now it should work as expected.
New node type: EtherSwitch router. This is a c3700 router with a Etherswitch NM-16ESW loaded.
Better consistency between buttons and menus. Many items have been renamed, toolbar buttons accessible from the menu etc. (thanks to rednectar).
Possibility to configure the AUX port. Only works for c7200 routers (Preferences -> Dynamips -> Base AUX port).
Changed standard naming convention for project and snapshots. Topology file is named topology.net, working directory: working and configurations directory: configs.
Duplicate option for annotations, ellipses and rectangles (** an item, right click -> Duplicate).
Horizontal + vertical alignment options (** nodes, right click -> Align horizontally/vertically).
Possibility to have multiple images for Qemu hosts, JunOS, PIX, ASA and IDS and to configure the number of interfaces on each devices.
Autosave feature to save your topology every x secondes (Preferences -> General).
A default base config (with hostname, exec-timeout commands etc.) is automatically loaded when creating a new IOS based router. The path to this default config can be changed in "IOS images and hypervisors" dialog.
A more understandable MAC address table for Ethernet switches (right click on a switch -> Show MAC address table).
Qemuwrapper improvements like cleaning old FLASH/SWAP files when creating a new device with a same hostname.
Multi Qemu based devices topologies now work using base images on Windows. Patched in Qemu 0.11.0 binary included in the all-in-one package (thanks tranzitwww!!!).
Support for unbasing Qemu images when creating or saving as a project. This means no dependencies with your base images thus you can easily distribute your project.
Option to replace unknown references (GUID: \device\npf_{802b5272-cd1b-431c-8cb5-f57ba76145c6}) to network interfaces on Windows when loading a NET file.
Option to replace unknown IOS image when loading a NET file.
Scroll the scene with the mouse **dle click or right and left clicks at the same time (thanks to SpookyCW). This behavior is to be changed in a future release.
Possibility to specify a directory where GNS3 settings file (gns3.ini) is located with the parameter --config-dir on the command line.
Romanian translation (thanks to tranzitwww).
Double click on a running node opens a console.
Reload all devices button.
French and Italian translation **s.


Below you can download GNS3, a network simulator for making topologies of routers (IOS, JunOS), firewalls (ASA, PIX). It is particularly useful for training to Cisco certifications (CCNA, CCNP, CCIP, CCSP, CCVP or CCIE) or Juniper certifications (JNCIA, JNCIS or JNCIE).

Windows

• GNS3 v0.7.3 all-in-one(includes Dynamips, Qemu/Pemu, Putty and WinPCAP 4.1.2)
• GNS3 v0.7.3 binary
  

MacOS X

• GNS3 v0.7.3 DMG package (experimental and Intel x86-64 only, includes dynamips).
  

Sources

• GNS3 v0.7.3 zip
• GNS3 v0.7.3 tgz
• GNS3 v0.7.3 bz2
  

Associated softwares

• Dynamips 0.2.8-RC2 binary for Linux x86 platforms
• Dynamips 0.2.8-RC2 binary for Linux x86_64 platforms
• Dynamips 0.2.8-RC2 binary for Mac OS X (Intel)
• Dynamips 0.2.8-RC2 binaries for Windows XP and 2000
• Dynamips 0.2.8-RC2 source code
  

• Qemu 0.11.0 patched binaries for Windows (32 bits only)
  
• Patch for Qemu 0.11.0 to support multicast, udp tunnels, pcap and lcap interfaces
  
• Qemu 0.12.5 patched binaries for Windows (32 and 64 bits)
  
• Patch for Qemu 0.12.5 to support multicast and udp tunnels
  
• Qemuwrapper 0.7.3 for Windows
  
• Microcore Linux 2.11.5 Qemu image
  
• Tinycore Linux 2.11.5 Qemu image
  
  

• Pemu 2008-03-03 binary for Linux
• Pemu 2008-03-03 binary for Windows
• Pemu 2008-03-03 source code
  

• Cisco image unpacker 0.1 binary for Windows
• Cisco image unpacker 0.1 source code
  

• VPCS 0.20a
  

fybsll

操了 链接有的没用  转自一下 你们自己看吧  不好意思
http://www.51chongdian.net/bbs/thread-25703-1-1.html

亮晶晶

roy