雏鹰部落

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 2739|回复: 11

GNS3 0.7.3 is released!

  [复制链接]
发表于 2010-12-14 00:56:43 | 显示全部楼层 |阅读模式
本帖最后由 task 于 2010-12-14 01:14 编辑

GNS3 0.7.3 is released!
Submitted by admin on Sun, 12/12/2010 - 23:59

After many months GNS3 0.7.3 is finally released! This is a major version including lot of changes and bug fixes as well as an improved GUI consistency.

It is recommended to uninstall your previous version of GNS3 before installing this one because there is a possibility of side effects when keeping an old GNS3 settings file (gns3.ini).

Here is a list of the changes:

    * Easily change the symbol of one or several nodes (** a node, then right click -> Change symbol).
    * A docked window to see on what device interface captures are running (View -> Docks -> Captures). You can stop capturing or start Wireshark using this view.
    * Only the necessary files (nvram, flash, disks etc.) are copied or kept when creating projects and snapshots.
    * Preventing unsaved interface labels to show up after loading a topology. This can be reset using the "show interface labels" button.
    * Improvements for ATM and Frame Relay switches: proper naming, dynamic mapping support and it is not needed to remove a link to change its DLCI/VC mapping.
    * PCAP capture support for Qemu based devices (Qemu host, JunOS ASA, PIX, IDS). This option cannot be used after the **ed device is started.
    * Fixed many issues with the snapshot feature. Now it should work as expected.
    * New node type: EtherSwitch router. This is a c3700 router with a Etherswitch NM-16ESW loaded.
    * Better consistency between buttons and menus. Many items have been renamed, toolbar buttons accessible from the menu etc. (thanks to rednectar).
    * Possibility to configure the AUX port. Only works for c7200 routers (Preferences -> Dynamips -> Base AUX port).
    * Changed standard naming convention for project and snapshots. Topology file is named topology.net, working directory: working and configurations directory: configs.
    * Duplicate option for annotations, ellipses and rectangles (** an item, right click -> Duplicate).
    * Horizontal + vertical alignment options (** nodes, right click -> Align horizontally/vertically).
    * Possibility to have multiple images for Qemu hosts, JunOS, PIX, ASA and IDS and to configure the number of interfaces on each devices.
    * Autosave feature to save your topology every x secondes (Preferences -> General).
    * A default base config (with hostname, exec-timeout commands etc.) is automatically loaded when creating a new IOS based router. The path to this default config can be changed in "IOS images and hypervisors" dialog.
    * A more understandable MAC address table for Ethernet switches (right click on a switch -> Show MAC address table).
    * Qemuwrapper improvements like cleaning old FLASH/SWAP files when creating a new device with a same hostname.
    * Multi Qemu based devices topologies now work using base images on Windows. Patched in Qemu 0.11.0 binary included in the all-in-one package (thanks tranzitwww!!!).
    * Support for unbasing Qemu images when creating or saving as a project. This means no dependencies with your base images thus you can easily distribute your project.
    * Option to replace unknown references (GUID: \device\npf_{802b5272-cd1b-431c-8cb5-f57ba76145c6}) to network interfaces on Windows when loading a NET file.
    * Option to replace unknown IOS image when loading a NET file.
    * Scroll the scene with the mouse **dle click or right and left clicks at the same time (thanks to SpookyCW). This behavior is to be changed in a future release.
    * Possibility to specify a directory where GNS3 settings file (gns3.ini) is located with the parameter --config-dir on the command line.
    * Romanian translation (thanks to tranzitwww).
    * Double click on a running node opens a console.
    * Reload all devices button.
    * French and Italian translation **s.

Thanks to all contributors and people posting ideas and bug reports, you have been extremely helpful to make this great version! Other improvements are planified and I'll post about possible contributions in a few days.


Enjoy!

    * Login to post comments

下载地址:
http://www.gns3.net/download


发表于 2010-12-14 09:25:29 | 显示全部楼层
终于更新了~
Task迅速啊~
发表于 2010-12-14 10:10:00 | 显示全部楼层
看看task的头像就觉得很有冲劲~~~
发表于 2010-12-14 10:29:36 | 显示全部楼层
马上下载用用,截图一张~

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
发表于 2010-12-14 11:15:19 | 显示全部楼层
TASK不愧为GNS3达人啊~
发表于 2010-12-14 15:23:43 | 显示全部楼层
,有task在,就不怎么担心GNS3出问题了
发表于 2010-12-14 18:03:54 | 显示全部楼层
task很给力。
发表于 2010-12-14 20:19:21 | 显示全部楼层
LZ辛苦了~~自觉顶了~~~~~~~~~~~~~
发表于 2010-12-15 09:34:55 | 显示全部楼层
GNS3达人     膜拜来了
发表于 2010-12-15 10:44:08 | 显示全部楼层
向高手致敬!            
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|熊猫同学技术论坛|小黑屋|网络工程师论坛 ( 沪ICP备09076391 )

GMT+8, 2022-8-12 17:39 , Processed in 0.075100 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表