其实自从第一次跟YL把86升挂掉后，对升级86一直存在心里障碍 ，嘻嘻 ，别说我心里素质差哦，实在是故障大条，把一个网络核心给升级挂了，全校断网，老师不找你拼命才怪 。此后工作快一年啦，再一次升级86啦，还是那么紧张。说真不是我想紧张啊，前天同事刚把68升挂了，抗了两台57过去，拿回三块板卡 。而且经常出现这种类型交换机升挂掉案例，这个东西不让人放心呜呜 。好吧啰嗦一大堆，升级开始啦！
第一步：理所当然确认升级信息
S8610#sh version
S8610#sh ver slots
具体就不写出来啦，对照软件版本发型手册，符合升级要求。不过发现是
Slot-M1 : M8610-CM
Hardware version : 1.0
Software version : RGNOS 10.2.00(3), Release(40301)
BOOT version : 10.2.34077
CTRL version : 10.2.38550
心里疙瘩一下，一代管理引擎，抑闷，这个东西比二代差很多。
第二步：备份配置，这个是必需的。虽然rj设备升级过程中不会像Cisco设备那样丢失配置，但是保存一下是习惯问题。
S8610#copy flash:config.text xmodem:
第三步：该拷贝rgos到设备中啦！
先看看flash中有什么东东
S8610#dir
Mode Link Size MTime Name
-------- ---- --------- ------------------- ------------------
<DIR> 1 0 1970-01-01 08:00:00 dev/
<DIR> 2 0 2008-10-23 12:02:30 mnt/
<DIR> 1 0 2010-12-12 22:13:35 ram/
<DIR> 2 0 2010-05-28 20:07:32 tmp/
<DIR> 7 0 1970-01-01 08:00:00 proc/
1 7833056 2008-10-23 12:26:08 lc_82xx.bin
1 3417344 2008-10-23 12:47:16 install_lc_20070010.bin
1 7002240 2008-10-23 12:47:08 rgnos.bin
1 5651232 1970-01-01 08:00:54 rgnos_lc.bin
1 238 2010-12-12 22:13:01 bin_info.txt
1 28042 2010-12-07 11:40:00 config.text
--------------------------------------------------------------
没主要看，没发现什么问题。
拷贝吧，
S8610#copy tftp://211.66.90.68/S8600_V10.3(5b1)_R87006_CM.bin flash:rgos.bin
Accessing tftp://211.66.90.68/S8600_V10.3(5b1)_R87006_CM.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*Dec 13 15:22:42: %ARPGUARD-4-DOS_DETECTED: ARP DoS attack was detected.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
% Tftp: the flash space is not enough, or something with flash is wrong!!
% File transmission failure
S8610#
出现错误了，flash空间不足，咋办呢？
仔细看一下，rgnos.bin，而我存放的是rgos.bin。【如果这样拷贝成功，重启应该不会出现故障，我估计没错话应该重启的时候是加载rgnos.bin。而rgos.bin只是被当成其它文件保存在flash，这是一种可能，当然还有另外一种可能，重启时候直接加载rgos.bin，然后升级管理引擎，同步线卡，升级成功。具体没实验过，别学我，小心点，记住rj以前版本的10.x存放的bin文件是rgnos。不然出问题就完啦 ，写到这里突然有点感谢是一代管理引擎，flash空间不过大，没有传送成功，没有重启】
庆幸一下，该解决问题啦，很简单，覆盖以前的rgnos.bin。
S8610#copy tftp://211.66.90.68/S8600_V10.3(5b1)_R87006_CM.bin flash:rgnos.bin
Accessing tftp://211.66.90.68/S8600_V10.3(5b1)_R87006_CM.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*Dec 13 15:28:04: %ARPGUARD-4-DOS_DETECTED: ARP DoS attack was detected.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
% Tftp: the flash space is not enough, or something with flash is wrong!!
% File transmission failure
S8610#
空间还是不足，这下麻烦啦！打电话给二线，给我回了一句话，去看升级手册，NND 。
看就看吧，有什么了不起的，下载RG-S8600系列交换机升级操作指导.pdf。看了一下，实在是忍不住想“kao”一下
启机后，按 Ctrl + C, 进入
ctrl菜单项，然后再按 ctrl +
q命令到 ctrl命令行下。
详见 3.2.2 进管理板Ctrl命令行
Ctrl>
升级手册那么写的，让我在Ctrl层升级，全学校的核心就这样让我重启，在Ctrl层慢慢升级 ？？？？？？？？？我都不知道是写给谁看的，让我跟客户说我重启设备，断网2~3小时升级。客户不直接吃了我才怪。
二线那边估计~~啦，指望不上啦，给公司其它升级过同事打电话。没结果，不知道怎么删除flash里面的东东。
只能给区域工程师打电话啦！
行吧，找到结果啦！
还是先备份：
S8610#copy flash:lc_82xx.bin tftp://211.66.90.68/lc_82xx.bin *Dec 13 16:05:45: %ARPGUARD-4-DOS_DETECTED: ARP DoS attack was detected.
Accessing flash:lc_82xx.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success : Transmission success,file length 7833056
S8610#
再备份
S8610#$010.bin tftp://211.66.90.68/install_lc_20070010.bin
Accessing flash:install_lc_20070010.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*Dec 13 16:07:40: %ARPGUARD-4-DOS_DETECTED: ARP DoS attack was detected.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success : Transmission success,file length 3417344
S8610#
又是备份
S8610#copy flash:rgnos_lc.bin tftp://211.66.90.68/rgnos_lc.bin
Accessing flash:rgnos_lc.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*Dec 13 16:09:27: %ARPGUARD-4-DOS_DETECTED: ARP DoS attack was detected.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success : Transmission success,file length 5651232
S8610#*Dec 13 16:09:37: %SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 110.64.129.240
备份这些是为了万一没有升级成功可以进入Ctrl层，把这些文件导回去，预防万一。
删除吧，把不必要的bin文件给删除啦！
S8610#del lc_82xx.bin 【线卡管理程序】
S8610#del
S8610#del install_lc_20070010.bin 【线卡程序】
S8610#del rgnos_lc.bin 【引擎管理程序】
S8610#drir
Translating "drir"...
% Unrecognized host or address, or protocol not running.
S8610#dir
Mode Link Size MTime Name
-------- ---- --------- ------------------- ------------------
<DIR> 1 0 1970-01-01 08:00:00 dev/
<DIR> 2 0 2008-10-23 12:02:30 mnt/
<DIR> 1 0 2010-12-12 22:13:35 ram/
<DIR> 2 0 2010-05-28 20:07:32 tmp/
<DIR> 7 0 1970-01-01 08:00:00 proc/
1 7002240 2008-10-23 12:47:08 rgnos.bin
1 238 2010-12-12 22:13:01 bin_info.txt
1 28052 2010-12-13 15:52:42 config.text
--------------------------------------------------------------
3 Files (Total size 7030530 Bytes), 5 Directories.
Total 33488896 bytes (31MB) in this device, 24797184 bytes (23MB) available.
S8610#
好吧空间够大啦。拷贝bin文件吧！
S8610#copy tftp://211.66.90.68/S8600_V10.3(5b1)_R87006_CM.bin flash:rgnos.bin
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Transmission finished, file length 15563328
THE PROGRAM VERSION: RGNOS 10.3.*, Release(21470)
Upgrade Master CM main program OK.
CURRENT PRODUCT INFORMATION :
PRODUCT ID: 0x20060060
PRODUCT DESCRIPTION: Ruijie High-density IPv6 10G Core Routing Switch(S8610) By Ruijie Network
SUCCESS: UPGRADING OK.
S8610#
拷贝成功，该重启啦！
S8610#rel
Processed with reload? [no]y
System Reload Now......
Reload Reason:
……
省略无数日志！！！！！！
苦苦等待，一颗心悬着！！！
等等等，系统终于起来啦，show ver
S8610>en
Password:
S8610#sh ver*Dec 13 08:20:31: %SYS-5-WARMSTART: System warmstart.
S8610#sh version
System description : Ruijie High-density IPv6 10G Core Routing Switch(S8610) By Ruijie Networks
System start time : 2010-12-13 8:19:41
System uptime : 0:0:0:51
System hardware version : 1.00
System software version : RGOS 10.3(5b1), Release(87006)
System BOOT version : 10.3.87006
System CTRL version : 10.3.87006
Module information:
Slot-1 : M8600-24SFP/12GT
Hardware version : 1.00
Software version : RGNOS 10.2.00(3), Release(40301)
BOOT version : 10.2.5211421
CTRL version : 10.2.5150358
Slot-5 : M8600-24GT/12SFP
Hardware version : 1.00
Software version : RGNOS 10.2.00(3), Release(40301)
BOOT version : 10.2.5211421
CTRL version : 10.2.5150358
Slot-M1 : M8610-CM
Hardware version : 1.00
Software version : RGOS 10.3(5b1), Release(87006)
BOOT version : 10.3.87006
CTRL version : 10.3.87006
S8610#
完啦，线卡都没有升级。瞎说，紧张，只能说过分紧张啦！人家设备还没开始同步线卡呢！
S8610#*Dec 13 08:20:46: %7: Transmitting install package file to slot [1] OK ...
*Dec 13 08:20:46: %7: Transmitting install package file to slot [5] ...
*Dec 13 08:20:46: %7: Transmitting file install_lc_20070010.bin;
S8610#*Dec 13 08:21:07: %7: Transmitting install package file to slot [5] OK ...
*Dec 13 08:21:07: %7: Install package transmission finished, system will reset cards ...
*Dec 13 08:21:07: %7: Reset card in slot [1]
*Dec 13 08:21:08: %7: Reset card in slot [5]
*Dec 13 08:21:08: %7: Software installation is in process, wait please ...
*Dec 13 08:21:08: %7: Installing, wait please !
*Dec 13 08:21:08: %OIR-6-REMCARD: Card removed from slot 5, interfaces disabled.
*Dec 13 08:21:09: %MAC_ADDRESS_LIMIT-4-STATUS_CHANGE: Dynamic MAC address limit takes effect.
*Dec 13 08:21:09: %OIR-6-REMCARD: Card removed from slot 1, interfaces disabled.
*Dec 13 08:21:18: %7: Installing, wait please !
*Dec 13 08:21:28: %7: Installing, wait please !
*Dec 13 08:21:38: %7: Installing, wait please !
*Dec 13 08:21:48: %7: Installing, wait please !
*Dec 13 08:21:58: %7: Installing, wait please !
*Dec 13 08:22:08: %7: Installing, wait please !
*Dec 13 08:22:18: %7: Installing, wait please !
*Dec 13 08:22:28: %7: Installing, wait please !
*Dec 13 08:22:38: %7: Installing, wait please !
*Dec 13 08:22:48: %7: Installing, wait please !
*Dec 13 08:22:58: %7: Installing, wait please !
*Dec 13 08:23:08: %7: Installing, wait please !
让我等，我就等吧！！！！！！！！！不然能怎么办！！！！！！
S8610#*Dec 13 08:23:13: %MAC_ADDRESS_LIMIT-4-STATUS_CHANGE: Dynamic MAC address limit didn’t take effect because incompatible line card **ed!
*Dec 13 08:23:13: %OIR-6-INSCARD: Card **ed in slot 1, interfaces are now online.
*Dec 13 08:23:22: %AUTO_UPGRADE-6-VER_SYNC_SUCCEED: Version synchronization for line card in slot [1] has been succeeded.
*Dec 13 08:23:22: %AUTO_UPGRADE-6-VER_SYNC_SUCCEED: Version synchronization for line card in slot [5] has been succeeded.
S8610#dir
Mode Link Size MTime Name
-------- ---- --------- ------------------- ------------------
<DIR> 1 0 1970-01-01 00:00:00 dev/
<DIR> 2 0 2008-10-23 04:02:30 mnt/
<DIR> 1 0 2010-12-13 08:19:43 ram/
<DIR> 2 0 2010-12-13 08:20:04 tmp/
<DIR> 7 0 1970-01-01 00:00:00 proc/
1 3736960 2010-12-13 08:16:48 install_lc_20070010.bin
1 3134656 2010-12-13 08:16:41 install_lc_20070020.bin
1 8568608 2010-12-13 08:16:27 rgos.bin 【升级后变成rgos，为了统一吧】
1 238 2010-12-13 08:14:48 bin_info.txt
1 28052 2010-12-13 07:52:42 config.text
哈哈，终于起来了，升级成功啦，嘻嘻，其实还真的挺吓人的！！！
|
[复制链接]
|熊猫同学技术论坛|小黑屋|
网络工程师论坛
( 沪ICP备09076391 )
发表于 2010-12-13 22:02:14
提升卡
置顶卡
变色卡
显身卡
let it up
疯哥 好久不见你那伟岸的身影啊···