雏鹰部落

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 8971|回复: 12

[讨论/求助] 【CCNA解析】专题三 交换相关知识

  [复制链接]
发表于 2010-7-15 16:27:15 | 显示全部楼层 |阅读模式
本帖最后由 林原静羽 于 2010-7-31 19:20 编辑

专题三为交换相关的知识点。
主要考察的方向有1.交换基础知识,如MAC地址表等。2.VLAN,单臂路由,VTP,trunk等 3.STP
3. Refer to the exhibit. Which two statements are true about interVLAN routing in the topology that is shown in the exhibit? (Choose two.)
A. Host E and host F use the same IP gateway address.
B. Router1 and Switch2 should be connected via a crossover cable.
C. Router1 will not play a role in communications between host A and host D.
D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces.
E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the exhibit.
F. The FastEthernet 0/0 interface on Router1 and Switch2 trunk ports must be configured using the same encapsulation type.
翻译:参考图,关于拓扑图展示的VLAN间路由哪两个描述是正确的?
A.主机E和F使用同一个网关IP地址。
B.路由器1和交换机2应该使用交叉线互连。
C.路由器1无法连通主机A和主机D。
D.路由器1的f0/0接口一定要配置成子接口。
E.路由器1需要更多的以太网接口才能容纳更多的VLAN。
F.路由器1的f0/0接口和交换机2的trunk口需配置成相同的封装类型。
解析:此题考察的是的VLAN间的路由。VLAN间的路由有1.单臂路由 2.多层交换。图中只有一台路由器,无三层交换机,故考察的是单臂路由。即将router1的f0/0接口配置成子接口,子接口的IP为四个VLAN的网关,路由器成为沟通各个VLAN之间的桥。交换机上联通到路由器的F0/1 trunk口和路由器的f0/0接口须封装成相同的类型。故C、E错,D对。E,F在不同的VLAN中,即属于不同的子网,网关不同,故A错。同种设备之间用交叉线连接,异种设备之间用直连线连接,故路由器和交换机之间用直连线,B错。故正确选项为DF。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
5.. A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration? (Choose three.)
A. A switch in the VTP client mode cannot ** its local VLAN database.
B. A trunk link must be configured between the switches to forward VTP **s.
C. A switch in the VTP server mode can ** a switch in the VTP transparent mode.
D. A switch in the VTP transparent mode will forward **s that it receives to other switches.
E. A switch in the VTP server mode only **s switches in the VTP client mode that have a higher VTP revision number.
F. A switch in the VTP server mode will ** switches in the VTP client mode regardless of the configured VTP domain membership.
翻译:一个网络管理员正在向新的技术人员解释VTP的配置,他需要讲解些什么?
A. 客户端(client)模式的交换机无法更新本地VLAN数据库。
B.两台交换机之间需要配置trunk链路转发VTP更新包。
C.服务器(server)模式的交换机可以更新处于透明(transparent)模式的交换机。
D.透明模式的交换机会将收到的更新信息转发给其他的交换机。
E.服务器模式的交换机只会更新配置号更高的客户端模式的交换机。
F.服务器模式的交换机将会更新客户端模式的交换机,不管它是否是VTP域的成员。
解析:此题考察的是VTP。VTP有三种模式:server,client,transparent.VTP的更新包以配置号码为准,号码越高,配置越新(E错,更新配置号低的交换机)。server可以主动更改vlan数据库的信息,client只能同步收到的拥有更高版本号的VTP信息,无法通过配置更新自已的VLAN数据库。transparent不同步但转发VTP信息,配置号只为0(C错,D对)。VTP信息只能传送给同一个VTP域内的交换机,且只能通过trunk链路,故两交换机之间需配置trunk链路(B对,F错)。选 项A有歧义,客户端模式的交换机主动增加、删除VLAN等,但可以同步别人的VTP消息达到更新本地数据库的目的,由于此题有三个正确答案,故A对。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
8. Refer to the exhibit. Both switches are using a default configuration. Which two destination addresses will host 4 use to send data to host 1? (Choose two.)
A. the IP address of host 1
B. the IP address of host 4
C. the MAC address of host 1
D. the MAC address of host 4
E. the MAC address of the Fa0/0 interface of the R1 router
F. the MAC address of the Fa0/1 interface of the R1 router
翻译:参考图,两台交换机使用默认配置,当主机4给主机1发数据时,使用哪两个目的地址。
解析:此题考察对通信过程中MAC,IP转换的理解。MAC是物理硬件地址,仅在LAN内有效,IP是逻辑地址,通信的整个过程都没有改变(NAT例外)。故选项为A和F。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
10. A company is installing IP phones. The phones and office computers connect to the same device. To ensure maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different network ** that of the office computer data traffic. What is the best network device to which to directly connect the phones and computers, and what technology should be implemented on this device? (Choose two.)
A. hub
B. router
C. switch
D. STP
E. subinterfaces
F. VLAN
翻译:一个公司安装IP电话,电话和办公电脑连入相同的设备,为了保证有电话有最大的数据吞吐量,公司需要将电话和办公电脑划分不同的网络。电话和电脑连接到哪一个网络设备最好,实现需求需在这台设备上配置什么技术?
解析:此题考察的是LAN内划分子网,即VLAN。VLAN是配置在交换机上,故答案选CF。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
11. What are two benefits of using VTP in a switching environment? (Choose two.)
A. It allows switches to read frame tags.
B. It allows ports to be assigned to VLANs automatically.
C. It maintains VLAN consistency across a switched network.
D. It allows frames ** multiple VLANs to use a single interface.
E. It allows VLAN information to be automatically propagated throughout the switching environment.
翻译:在交换环境中使用VTP的优点是什么?
A.允许交换机读帧的标记。
B.允许端口自动划分VLAN。
C.维护交换网络中VLAN信息的一致性。
D.多个VLAN的帧使用一个接口。
E.在交换环境中自动传递VLAN信息。
解析:考察VTP的用途。VTP信息可以同步VLAN信息,维护交换网络中VLAN信息的一致性。选项为CE。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
14. Refer to the exhibit. A network associate needs to configure the switches and router in the graphic so that the hosts in VLAN3 and VLAN4 can communicate with the enterprise server in VLAN2. Which two Ethernet segments would need to be configured as trunk links? (Choose two.)
A. A
B. B
C. C
D. D
E. E
F. F
翻译:参考图,一个网络助理工程师需配置图中的交换机和路由器使得VLAN3和VLAN4中的主机能够与VLAN2中的server通信,哪两个以太网段需配置成trunk链路。
解析:考察trunk使用的场合。交换机和交换机之间透传不同的VLAN,交换机和路由器(单臂路由)。故选项为CF。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
15. Which two values are used by Spanning Tree Protocol to elect a root bridge? (Choose two.)
A. amount of RAM
B. bridge priority
C. IOS version
D. IP address
E. MAC address
F. speed of the links
翻译:生成树选举根桥时根据哪两个值?
解析:考察生成树选举根桥过程。STP中选举根桥是根据bridge-id桥ID,桥ID由优先级和MAC地址组成,故选项为BE。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
20. Which three statements are typical **acteristics of VLAN arrangements? (Choose three.)
A. A new switch has no VLANs configured.
B. Connectivity between VLANs requires a Layer 3 device.
C. VLANs typically decrease the number of collision domains.
D. Each VLAN uses a separate address space.
E. A switch maintains a separate bridging table for each VLAN.
F. VLANs cannot span multiple switches.
翻译:哪三个为VLAN的典型特征?
A.一个新的交换机没有VLAN的配置。
B.VLAN之间的通信需要一个三层设备。
C.VLAN减少了冲突域。
D.每个VLAN使用单独的地址空间。
E.一个交换机为每个VLAN维护一个单独的MAC地址表。
F.VLAN不能跨越多个交换机。
解析:考察VLAN。VLAN全称为虚拟局域网,在二层上划分广播域,突破地址的限制,可以跨越交换机组成单独的子网,故D对,F错。默认情况下CISCO的交换机就有一个VLAN,VLAN1,故A错。不同的VLAN属于不同的广播域,故需要三层设备才能通信,B对。VLAN是交换机上配置的,交换机是隔离冲突域的设备,故冲突域没有变,C错。VLAN之所以能够在二层上划分广播域,就是由于交换机为每个VLAN维护一个MAC地址表,无法跨表查询信息。故正确选项为BDE。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
23. Switch ports operating in which two roles will forward traffic according to the IEEE 802.1w standard?
(Choose two.)
A. alternate
B. backup
C. designated
D. disabled
E. root
翻译:在802.1W中哪两种端口转发流量。
解析:考察STP。802.1W即RSTP,快速生成树协议。DP和RP指定端口和根端口为转发端口,故选 CE。
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
24. Refer to the exhibit. Given the output shown ** this Cisco Catalyst 2950, what is the most likely
reason that interface FastEthernet 0/10 is not the root port for VLAN 2?
A. This switch has more than one interface connected to the root network segment in VLAN 2.
B. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree.
C. This switch interface has a higher path cost to the root bridge than another in the topology.
D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.
翻译:参考图中C2950交换机输出信息,接口f0/10无法成为VLAN2根端口的最大原因是什么?
A.交换机上不止一个端口连接到VLAN2的根网段上。
B.当选举时,这台交换机运行RSTP,而指定交换机运行802.1D.
C.比起拓扑中其它,这个接口到达根桥的cost值较大。
D.这台交换机比指定交换机桥ID小。
解析:考察STP选举根端口过程。每个非桥桥上需选举一个根端口。判断依据有:1.离根桥的cost值越小越优。2.发送方网桥越低越优。3.发送方端口越低越优。故最可能的原因是C。
发表于 2010-7-15 17:12:33 | 显示全部楼层
哇 这个好  还有答案的
发表于 2010-7-15 22:26:23 | 显示全部楼层
楼主的原创帖非常有价值,想成为真正的CCNA,可以看这个帖子。
发表于 2010-7-15 23:26:28 | 显示全部楼层
楼主的原创帖非常有价值,想成为真正的CCNA,可以看这个帖子。
发表于 2010-7-15 23:55:02 | 显示全部楼层
LZ对CCNA的题库进行了归纳和总结,对每个CCNA学习的学员会有很大的帮助。
期待接下来的专题!
发表于 2010-7-17 12:51:50 | 显示全部楼层
专题出到第10的时候,再来出一个合集。
                      静雨出品,毕属精品
发表于 2010-7-18 08:58:45 | 显示全部楼层
本帖最后由 l16178967 于 2010-7-18 09:10 编辑

楼主加油 楼主
发表于 2010-8-13 10:16:32 | 显示全部楼层
学习了,谢啦!
发表于 2010-8-16 12:46:44 | 显示全部楼层
无图无真相!
发表于 2010-8-19 11:18:15 | 显示全部楼层
这个是什么题?没有图啊,题目看不懂
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|熊猫同学技术论坛|小黑屋| 网络工程师论坛 ( 沪ICP备09076391 )

GMT+8, 2024-9-27 06:54 , Processed in 0.103767 second(s), 18 queries , Gzip On.

快速回复 返回顶部 返回列表