雏鹰部落

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 6537|回复: 12

[讨论/求助] 为了顺应CCIEv4.0,2009年圣诞节左右CCNP将改版。

[复制链接]
发表于 2009-9-25 15:17:13 | 显示全部楼层 |阅读模式
  51CTO记者从思科(中国)认证部门了解到,为了顺应CCIEv4.0,CCNP将在2009年末重大改版,更改时间为2009年圣诞节左右。
  原有科目:
  CCNP Prerequisites
  Valid CCNA certification
  CCNP Exams &Recommended Training
  Required Exam(s) Recommended Training
  642-901 BSCI Building Scalable Cisco Internetworks (BSCI)
  642-812 BCMSN Building Cisco Multilayer Switched Networks (BCMSN)
  642-825 ISCW Implementing Secure Converged Wide Area Networks (ISCW)
  642-845 ONT Optimizing Converged Cisco Networks (ONT)
  OR
  Required Exam(s) Recommended Training
  642-892 Composite Building Scalable Cisco Internetworks (BSCI)
  Building Cisco Multilayer Switched Networks (BCMSN)
  642-825 ISCW Implementing Secure Converged Wide Area Networks (ISCW)
  642-845 ONT Optimizing Converged Cisco Networks (ONT)
  CCNP此次改版考试科目和考试代号有重大调整;将完全跟上新版CCIE V4.0的潮流:
  1、高级路由Route v1.0 考试编号:642-902 (跟之前的没多少变化,可能会把ISCW的部分内容往这里调)
  2、多层交换Switch v1.0 考试编号:642-813 (基本上无多少变化 应该是把QOS放回来)
  3、安全排错TShoot v1.0 考试编号:642-832 (这门顺应CCIE v4.0考试标准的2个小时排错)
消息称CCNP改版后考试费用将有部分下调,请大家继续关注。
1.00 Implement Layer 2 Technologies √
1.10 Implement Spanning Tree Protocol (STP)
  (a) 802.1d
  (b) 802.1w
  (c) 801.1s
  (d) Loop guard
  (e) Root guard
  (f) Bridge protocol data unit (BPDU) guard
  (g) Storm control
  (h) Unicast flooding
  (i) Port roles, failure propagation, and loop guard operation
  1.20 Implement VLAN and VLAN Trunking Protocol (VTP)
  1.30 Implement trunk and trunk protocols, EtherChannel, and load-balance
  1.40 Implement Ethernet technologies
  (a) Speed and duplex
  (b) Ethernet, Fast Ethernet, and Gigabit Ethernet
  (c) PPP over Ethernet (PPPoE)
  1.50 Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control
  1
1.60 Implement Frame Relay
  (a) Local Management Interface (LMI)
  (b) Traffic shaping
  (c) Full mesh
  (d) Hub and spoke
  (e) Discard eligible (DE)
1.70 Implement High-Level Data Link Control (HDLC) and PPP
  2.00 Implement IPv4
  2.10 Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)
  2.20 Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)
  2.30 Implement IPv4 RIP version 2 (RIPv2)
  2.40 Implement IPv4 Open Shortest Path First (OSPF)
  (a) Standard OSPF areas
  (b) Stub area
  (c) Totally stubby area
  (d) Not-so-stubby-area (NSSA)
  (e) Totally NSSA
  (f) Link-state advertisement (LSA) types
  (g) Adjacency on a point-to-point and on a multi-access network
  (h) OSPF graceful restart
  2.50 Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)
  (a) Best path
  (b) Loop-free paths
  (c) EIGRP operations when alternate loop-free paths are available, and when they are not available
  (d) EIGRP queries
  (e) Manual summarization and autosummarization
  (f) EIGRP stubs
  2.60 Implement IPv4 Border Gateway Protocol (BGP)
  (a) Next hop
  (b) Peering
  (c) Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP)
  2.70 Implement policy routing
  2.80 Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)
  2.90 Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features
  3.00 Implement IPv6
  3.10 Implement IP version 6 (IPv6) addressing and different addressing types
  3.20 Implement IPv6 neighbor discovery
  3.30 Implement basic IPv6 functionality protocols
  3.40 Implement tunneling techniques
  3.50 Implement OSPF version 3 (OSPFv3)
  3.60 Implement
EIGRP version 6 (EIGRPv6)
  3.70 Implement filtering and route redistribution
  4.00 Implement MPLS Layer 3 VPNs
  4.10 Implement Multiprotocol Label Switching (MPLS)
  4.20 Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers
  4.30 Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite)
  5.00 Implement IP Multicast
  5.10 Implement Protocol Independent Multicast (PIM) sparse mode
  5.20 Implement Multicast Source Discovery Protocol (MSDP)
  5.30 Implement interdomain multicast routing
  5.40 Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router (BSR)
  5.50 Implement multicast tools, features, and source-specific multicast
  5.60 Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD)
  6.00 Implement Network Security
  6.01 Implement access lists
  6.02 Implement Zone Based Firewall
  6.03 Implement Unicast Reverse Path Forwarding (uRPF)
  6.04 Implement IP Source Guard
  6.05 Implement authentication, authorization, and ac**ing (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured)
  6.06 Implement Control Plane Policing (CoPP)
  6.07 Implement Cisco IOS Firewall
  6.08 Implement Cisco IOS Intrusion Prevention System (IPS)
  6.09 Implement Secure Shell (SSH)
  6.10 Implement 802.1x
  6.11 Implement NAT
  6.12 Implement routing protocol authentication
  6.13 Implement device access control
  6.14 Implement security features
  7.00 Implement Network Services
  7.10 Implement Hot Standby Router Protocol (HSRP)
  7.20 Implement Gateway Load Balancing Protocol (GLBP)
  7.30 Implement Virtual Router Redundancy Protocol (VRRP)
  7.40 Implement Network
Time Protocol (NTP)
  7.50 Implement DHCP
  7.60 Implement Web Cache Communication Protocol (WCCP)
  8.00 Implement Quality of Service (QoS)
  8.10 Implement Modular QoS CLI (MQC)
  (a) Network-Based Application Recognition (NBAR)
  (b) Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latency queuing (LLQ)
  (c) Classification
  (d) Policing
  (e) Shaping
  (f) Marking
  (g) Weighted random early detection (WRED) and random early detection (RED)
  (h) Compression
  8.20 Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies
  8.30 Implement link fragmentation and interleaving (LFI) for Frame Relay
  8.40 Implement generic traffic shaping
  8.50 Implement Resource Reservation Protocol (RSVP)
  8.60 Implement Cisco AutoQoS
  9.00 Troubleshoot a Network
  9.10 Troubleshoot a complex Layer 2 network issue
  9.20 Troubleshoot a complex Layer 3 network issue
  9.30 Troubleshoot a network in response to an application problem
  9.40 Troubleshoot network services
  9.50 Troubleshoot network security
  10.00 Optimize the Network
  10.01 Implement syslog and local logging
  10.02 Implement IP Service Level Agreement SLA
  10.03 Implement NetFlow
  10.04 Implement SPAN, RSPAN, and router IP traffic export (RITE)
 楼主| 发表于 2009-9-25 15:19:01 | 显示全部楼层
本帖最后由 kkingkill 于 2009-9-25 18:26 编辑

BSCI的ISIS没了,增加了MPLS
发表于 2009-9-25 15:39:29 | 显示全部楼层
发表于 2009-9-25 15:51:55 | 显示全部楼层
改版 改版 改版 改版

So what ?
发表于 2009-9-25 15:53:38 | 显示全部楼层
呜呜呜  

改版咯
发表于 2009-9-25 18:09:55 | 显示全部楼层
isis没了好...本来就不怎么用的说
发表于 2009-9-25 20:51:47 | 显示全部楼层
好像更合理 了!……
发表于 2009-9-25 22:05:02 | 显示全部楼层
顺应技术的变革、创新就是进步。取其精华、去其糟粕。


我顶.....
发表于 2009-9-25 23:01:00 | 显示全部楼层
顶。。。感谢书生~!这么详细~!顶。。。
发表于 2009-9-26 00:30:25 | 显示全部楼层
is-is 这次移动四期改造省网全部用IS-IS协议啊 现在还没有过渡到新设备华为上面啊 估计要等年底完成过渡吧
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|熊猫同学技术论坛|小黑屋| 网络工程师论坛 ( 沪ICP备09076391 )

GMT+8, 2024-11-24 11:20 , Processed in 0.076443 second(s), 18 queries , Gzip On.

快速回复 返回顶部 返回列表