TK的VLAN问题,请高手帮忙!!!!!

白杨 · 发表于 2005-8-24 17:19:12

You are a senior network administrator at TestKing and your trusty junior administrator tells you that<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>he failed his task of adding VLAN 50 to a Catalyst switch in the network.<o:p></o:p>You enter in the 'show vtp status' command and get this output:<o:p></o:p>TK2# show vtp status<o:p></o:p>VTP Version:2<o:p></o:p>Configuration Revision:7<o:p></o:p>Maximum VLANs supported local:68<o:p></o:p>Number of existing VLANs:8<o:p></o:p>VTP Operating Mode:Client<o:p></o:p>VTP Domain Name:corp<o:p></o:p>VTP Pruning Mode:Disabled<o:p></o:p>VTP V2 Mode:Disabled<o:p></o:p>VTP Traps Generation:Disabled<o:p></o:p>MD5 digest:0x22 0xF3 0x1A<o:p></o:p>Configuration last modified by 172.18.22.15 at5-28-031t:53:20<o:p></o:p>What commands must be issued on this switch to add VLAN 50 to the database? (Choose two.)<o:p></o:p>A.TK2(config-if)# switchport access vlan 50<o:p></o:p>B.TK2(vlan)# vtp server<o:p></o:p>C.TK2(config)# config-revision 20<o:p></o:p>D.TK2(config)# vlan 50 name Tech<o:p></o:p>E.TK2(vlan)# vlan 50<o:p></o:p>F.TK2(vlan)# switchport trunk vlan 50<o:p></o:p>Answer: B, E<o:p></o:p>这题我总觉的有问题啊。我在做这个实验是如下的命令：TK2#vlan database                                                                                                TK2(vlan)#vtp server                                                                                           TK2(vlan)#vlan 50 name Tech这样才行的，请问，这题该怎样做呢？？？？

快乐孤儿 · 发表于 2005-8-24 17:32:54

先改成vtp server,然后再添加

白杨 · 发表于 2005-8-25 18:07:44

先谢过.但是E.TK2(vlan)# vlan 50 这个命令不全啊.是这样的吗?有点迷惑了。<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

快乐孤儿 · 发表于 2005-8-25 18:51:30

vlan vlan-num name vlan-name 格式是这样的,不用name 也可以

白杨 · 发表于 2005-8-25 21:38:41

<IMG src="http://www.spoto.net/bbs/images/Emotions/35.gif">谢谢

账号		自动登录	找回密码
密码			立即注册

[讨论/求助] TK的VLAN问题,请高手帮忙!!!!!

浏览过的版块