RIP动态路由配置实验

only皇孑

Router 3

Router3>enable

Router3#configure terminal

Router(config)#interface loopback0

Router(config-if)#ip address 172.168.11.1 255.255.255.0

‍Router(config)#interface f0/0

Router(config-if)#ip address 172.168.12.1 255.255.255.0

‍Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#router rip

‍Router(config-router)#version 2

Router(config-router)#no auto-summary

Router(config-router)#network 172.168.0.0

Router(config-router)#exit

Router(config)#exit

Router0#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router 4

Router4>enable

Router4#configure terminal

Router(config)#interface f0/0

Router(config-if)#ip address 172.168.12.2 255.255.255.0

Router(config-if)#no shutdown

‍Router(config)#interface f0/1

Router(config-if)#ip address 172.168.13.1 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#router rip

‍Router(config-router)#version 2

Router(config-router)#no auto-summary

Router(config-router)#network 172.168.0.0

Router(config-router)#exit

Router(config)#exit

Router4#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router 5

Router5>enable

Router3#configure terminal

Router(config)#interface loopback0

Router(config-if)#ip address 172.168.14.1 255.255.255.0

‍Router(config)#interface f0/1

Router(config-if)#ip address 172.168.13.2 255.255.255.0

‍Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#router rip

‍Router(config-router)#version 2

Router(config-router)#no auto-summary

Router(config-router)#network 172.168.0.0

Router(config-router)#exit

Router(config)#exit

Router0#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

完成了，现在可以相互ping一下看看通不通了。
如：（在r3上ping172.168.14.1和172.168.13.1和172.168.13.2

在r4上ping172.168.11.1和172.168.14.1

在r5上ping172.168.11.1和172.168.12.1和172.168.12.2）

如果配置成功的话上面这些地址都可以ping的通。

在配置的过程中你可以用show ip route 这条命令来查看配置信息

如：在router3上显示

Router#show ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

172.168.0.0/24 is subnetted, 4 subnets

C
172.168.11.0 is directly connected, Loopback0

C
172.168.12.0 is directly connected, FastEthernet0/0

R
172.168.13.0 [120/1] via 172.168.12.2, 00:00:10, FastEthernet0/0

R
172.168.14.0 [120/2] via 172.168.12.2, 00:00:10, FastEthernet0/0

在router4上显示

Router#show ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

172.168.0.0/24 is subnetted, 4 subnets

R
172.168.11.0 [120/1] via 172.168.12.1, 00:00:13, FastEthernet0/0

C
172.168.12.0 is directly connected, FastEthernet0/0

C
172.168.13.0 is directly connected, FastEthernet0/1

R
172.168.14.0 [120/1] via 172.168.13.2, 00:00:15, FastEthernet0/1

在router5上显示

Router#show ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

172.168.0.0/24 is subnetted, 4 subnets

R
172.168.11.0 [120/2] via 172.168.13.1, 00:00:21, FastEthernet0/1

R
172.168.12.0 [120/1] via 172.168.13.1, 00:00:21, FastEthernet0/1

C
172.168.13.0 is directly connected, FastEthernet0/1

C
172.168.14.0 is directly connected, Loopback0

以上显示的信息表明它们之间已经相互学习到了路由信息，看看你配置的是否显示的一样。

仔细检查一下~

完成了

task

这是草稿吧？

林原静羽

还是实验报告 ？

kkingkill

后期可以再加工排版一下会更好！

Jeff.

技术常总结，幸福常相伴

sujf

楼主可以考虑一下把字体统一一下，然后自己的注释用不同颜色标注。在进行一些排版这样更容易让大家理解和学习。

there.zcj

关注中，前段时间把CISCO给耽误了，现在重新捡起来学。。。。

linda.!

鼓励鼓励！

AmilyWyb

无比的晕。。。不过看在LZ辛苦发上来的份上顶了吧！