|
这个图~起完BGP以后为什么在R3上PING不通R1的LOOKBACK口?
EBGP都是用直连接口,没有用LOOKBACK口做跟新源,R3上能学到R1的LOOKBACK口的路由,R1也能学到R3的,
R1的路由表:
Gateway of last resort is not set
1.0.0.0/24 is subnetted, 4 subnets
C 1.1.0.0 is directly connected, Loopback0
C 1.1.1.0 is directly connected, Loopback1
B 1.1.2.0 [20/0] via 12.12.12.2, 00:07:56
B 1.1.3.0 [20/0] via 12.12.12.2, 00:07:56
12.0.0.0/30 is subnetted, 1 subnets
C 12.12.12.0 is directly connected, Serial1/1
R2路由表:
Gateway of last resort is not set
1.0.0.0/24 is subnetted, 4 subnets
B 1.1.0.0 [20/0] via 12.12.12.1, 00:05:06
B 1.1.1.0 [20/0] via 12.12.12.1, 00:05:06
B 1.1.2.0 [20/0] via 23.23.23.2, 00:00:19
B 1.1.3.0 [20/0] via 23.23.23.2, 00:00:19
23.0.0.0/30 is subnetted, 1 subnets
C 23.23.23.0 is directly connected, Serial1/1
24.0.0.0/30 is subnetted, 1 subnets
C 24.24.24.0 is directly connected, Serial1/2
12.0.0.0/30 is subnetted, 1 subnets
C 12.12.12.0 is directly connected, Serial1/0
R3路由表:
Gateway of last resort is not set
1.0.0.0/24 is subnetted, 4 subnets
B 1.1.0.0 [20/0] via 23.23.23.1, 00:08:36
B 1.1.1.0 [20/0] via 23.23.23.1, 00:08:36
C 1.1.2.0 is directly connected, Loopback0
C 1.1.3.0 is directly connected, Loopback1
23.0.0.0/30 is subnetted, 1 subnets
C 23.23.23.0 is directly connected, Serial1/0 |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
x
|