TK[78]最新一些题目没有答案,大家一起讨论下吧
<P>QUESTION NO: 6<BR>What does a Layer 2 switch use to decide where to forward a received frame?<BR>A. source MAC address<BR>B. source IP address<BR>C. source switch port<BR>D. destination IP address<BR>E. destination port address<BR>F. destination MAC address</P><P>这题选F,对吗?</P> <P>A CCNA candidate is working on a 2600 Cisco router. The person needs to verify that the configuration<BR>register is set to boot the router IOS from flash memory and use the commands saved in the<BR>startup-configuration file. Which command will display this information, and what is the configuration<BR>register value that should be displayed?<BR>A. show startup-configand 0x2142<BR>B. show versionand 0x2102<BR>C. show flashand 0x2102<BR>D. show versionand 0x2142<BR>E. show running-configand 0x2142<BR>F. show flashand 0x2142</P><P>这题题目到底是要我们看什么啊?</P> <P>A workgroup switch is configured with all ports assigned to VLAN2. In<BR>addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports<BR>to a new VLAN on this switch?<BR>A. The additions will create more collision domains.<BR>B. IP address utilization will be more efficient.<BR>C. More bandwidth will be required than was needed previously.<BR>D. An additional broadcast domain will be created.<BR>E. The possibility that switching loops will occur will increase dramatically.</P><P>个人认为选A</P><p>［此帖子已被 快乐孤儿 在 2005-8-27 14:59:58 编辑过］ <P>TK78,没错，就是78...</P><P>比77.1多了8道题,上面就是多出来的题目.另外5道比较简单,没有列出来...</P><P>请大家指教一下吧,谢谢</P><P> </P> 关于你提到的问题，<A href="http://www.spoto.net/bbs/ShowPost.asp?id=4208">http://www.spoto.net/bbs/ShowPost.asp?id=4208</A>已经有了回复！去看看吧！ <P>呵呵,谢谢,我看到了...</P><P>非常感谢</P>
页:
[1]