思科ASA5510 求配置实现上网！
ciscoasa(config)# show run: Saved
:
ASA Version 8.2(5)
!
hostname ciscoasa
enable password .NA.apnCHVyz6rua encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address 222.77.80.8 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
access-list allow extended permit ip any any
access-list allow extended permit icmp any any
pager lines 24
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
access-group allow in interface outside
route outside 0.0.0.0 0.0.0.0 222.77.80.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:a80e61d6b6eaf1758cd218aa63764e70
: end
ciscoasa(config)#
如此配置还是无法上网，求解！
内网网段192.168.0.0
外网电信固定IP：222.77.80.8网关：222.77.80.1
单防火墙无路由器！需要配置路由功能上网！
本帖最后由 紫川凌 于 2012-4-5 10:30 编辑
没有拓扑不好给意见，但是你的show run 中没有回程路由。根据你的需求假如下面直接连交换机的话，你的inside口的IP地址应该是192.168.0.1 广域网------5510 E0/0接口222.77.80.8
5510E0/1接口-----交换机 192.168.0.1
回程路由如何配置？ 少了回程路由会出现什么问题？ 没有人懂吗？ 最近我也在弄这个思科的防火墙，水平有限，不好办
页:
[1]