jiazeyao 发表于 2011-4-22 21:45:30

GNS怎么将路由器变成交换机的

比如在路由器3640上加多个16ESW模块,但是还是路由器不是么。怎么使用交换机的命令呢。
又比如说是不是可以在路由上no掉ip routing,然后开启个交换功能的?
求解答啊。不然哥就去找真机做了。

heiniu800 发表于 2013-5-8 21:26:08

好想知道GNS3 路由器添加交换功能的实验

明天¤晴天℃ 发表于 2011-4-23 21:36:57

好强大啊 学习 学习

jiazeyao 发表于 2011-4-23 18:25:45

回复 12 # andersen 的帖子


支持的啊?那应该是使用的格式不一样了。我没发现。研究去~~~~

王晓强 发表于 2011-4-23 18:21:18

jiazeyao 发表于 2011-4-23 07:50 static/image/common/back.gif
回复 2 # task 的帖子

难道说不支持vlan么。


支持VLAN的~
但要注意模式~
另外,查看命令是show vlan-switch

ft543603 发表于 2011-4-23 13:39:55

x学习学习。。

jiazeyao 发表于 2011-4-23 10:45:21

回复 7 # task 的帖子

哥你好专业。--

jiazeyao 发表于 2011-4-23 10:43:39

回复 8 # roy 的帖子

--好奢求也能参加BOOTCAMP

roy 发表于 2011-4-23 10:01:13

我看不错噢 谢谢楼主 > _ <
BOOTCAMP 一切皆有可能

task 发表于 2011-4-23 08:29:33

回复 5 # jiazeyao 的帖子

原文:http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet09186a00801aca3e.html

思科官网关于16ESW支持的功能介绍:
Features and Benefits Table 1. Features and Benefits of Cisco EtherSwitch Modules
FeaturesBenefits
16/36 10BaseT/100BaseTX PortsDelivers up to 200 Mbps of bandwidth (full duplex) Layer 2; forwards and filters backflow at full wire speed on each port
Autosensing on each portDetects the speed of the attached device and automatically configures the port for 10- or 100-Mbps operation
Integrated SwitchingProvides fewer points of management for remote and small branch offices
Support for 802.1P QoSSupports QoS based on the Institute of Electrical and Electronics Engineers (IEEE) class-of-service (CoS) and port-based prioritization, allowing the switch to change the CoS settings of tagged packets on a per-port basis
802.1Q TrunkingAllows the setup of separate VLANs with tagged and untagged framing; trunking is used to save ports when creating a link between two devices implementing VLANs
802.1D Spanning Tree (a Layer 2 link-management protocol that provides path redundancy while preventing undesirable loops in the network)Simplifies network configuration and improves fault tolerance
Voice Virtual LAN (VLAN) feature for IP PhonesEnables phones to be placed into their own VLANs without the need for end-user intervention; a user can plug the phone into the switch, and the switch provides the phone with the necessary VLAN information
Port-Based Reclassification for Queues on each 10/100 that are Configurable using a Weighted Round Robin (WRR) SchedulerEnables users to prioritize mission-critical traffic, such as VoIP and IP-based video applications over regular traffic
Media Access Control (MAC)-Based Port-Level SecurityPrevents unauthorized stations from accessing the switch; Cisco fully supports the entire set of Requests for Comments (RFCs)
Multifunction LEDs per Port for Port StatusProvide a comprehensive and convenient visual management system
Cisco IOS Command-Line Interface (CLI)Provides configuration through Cisco IOS CLI and provides common user interface for all the router functions
Multicast Management SupportOffers Internet Group Management Protocol (IGMP) snooping in hardware for management support
MemoryFeatures 4-/8-MB shared-memory architecture that is shared across all ports
SNMP ManagementOffers support for Simple Network Management Protocol (SNMP) Management Information Base (MIB) manageable via a MIB browser
Cisco Pre-standard Power over Ethernet (optional)EtherSwitch with the external power chassis or internal power supply upgrades can power Cisco IP Phones and wireless access points
Gigabit Ethernet Support: One or Two 1000BaseT Ports per EtherSwitchAllows external connections to other switches and Gigabit Ethernet file servers. Required for intra-chassis stacking of modules
页: [1] 2
查看完整版本: GNS怎么将路由器变成交换机的