[上海CCNA01 实验]单臂路由
实验名称:单臂路由实验原理:
1、 Layer two Switching
2、 Layer three Routing
3、 Dividing a physical interface into sub-interfaces
4、 Encapsulate a VLan in a router
实验拓扑:
见附件图
任务分配:
Zhao Song
Configure two Cisco 2950 Switches and two routers as pc terminals.
Given configuration
Two VLans: vlan2, vlan3
Two IP domains for PC terminals: 192.168.2.0, 192.168.3.0
Default gateway: 192.168.2.254, 192.168.3.254
Du MinZhong
Configure a Cisco 1900 Switch and two routers as pc terminals.
Given configuration:
Two VLans: vlan4, vlan5
Two IP domains for PC terminals: 192.168.4.0, 192.168.5.0
Default gateway: 192.168.4.254, 192.168.5.254
Xia CongQi
Configure a router to route four VLans so that any terminal can ping the other ones
Given configuration:
Interface Fa0/1 for Zhao Song
Interface Fa0/0 for Du MinZhong
Gateways refer to the configuration before.
基本命令:
2621
Encapsulation ISL/dot1q ?
Int fa 0/0.?
No ip routing
Ip default-gateway
2950
Vlan ?
Name
Vtp
Vtp domain
Switchport access vlan ?
Switchport mode trunk
1900
Vlan ? name
Vlan-membership static ?
Trunk on
实验中问题:
Mr Song deleted the flash of a switch in the process of experiment…
详情请看嵩哥的检讨~
[ 本帖最后由 silver_belial 于 2007-8-5 17:40 编辑 ] 顶一下楼主,支持原创,继续加油。 这个...看不懂...啊... 谢谢楼主。。。。。。。。。。。。。。 -- --
回复 1# silver_belial 的帖子
ddddddddddddddddddddd下过来玩玩,嘿嘿~~~
下过来玩玩,嘿嘿~~~下过来玩玩,嘿嘿~~~
下过来玩玩,嘿嘿~~~dddddddddd
ddddddddddddddddddddddddddd -- -- --
页:
[1]
2