RIP宣告问题求解

dzdd2012

routerA：
router rip                                    
version 2
network 192.168.0.0
routerB：
router rip version 2 network 192.168.0.0routerC：router rip version 2 network 192.168.0.0
三个路由器的路由配置如下  RA#show ip routeRA#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area       * - candidate default, U - per-user static route, o - ODR       P - periodic downloaded static route
Gateway of last resort is not set
C    192.168.1.0/24 is directly connected, FastEthernet0/0C    192.168.12.0/24 is directly connected, FastEthernet0/1C    192.168.13.0/24 is directly connected, Ethernet0/1/0请问为什么接收不到相应的路由呢？ 给位高手和好心人？？？

Power

你给的图有一些乱，我就按照从左往右的顺序给你个参考配置：
左边第一台路由器：Router2
router rip
version 2
no auto-summary
network 192.168.3.0
network 192.168.13.0
中间路由器：Router0
router rip
version 2
no auto-summary
network 192.168.1.0
network 192.168.12.0
network 192.168.13.0
右边第三台路由器：Router1
router rip
version 2
no auto-summary
network 192.168.2.0
network 192.168.12.0
-----------------------------------
配置完毕。

dzdd2012

谢谢你的回复  谢谢