立即注册 登录
雏鹰部落 返回首页

task的个人空间 https://bbs.spoto.net/?73294 [收藏] [复制] [分享] [RSS]

日志

2011-04-26宁德农行割接感想

热度 5已有 1336 次阅读2011-4-28 11:00 |

2011-04-26宁德农行割接感想


 

主要任务:将原本的Cisco 7507AR01AR02)下架,更换为H3C SR6608,并进行调测。

1.        模块安装

2.        设备上架

3.        网络布线

4.        IOS导入与主备slot IOS boot-loader设置

5.        设备调试

6.        割接前预配导入

7.        所有网点OSPF调测

8.        连通性测试

 

 

1.        模块安装


 

 

2.        设备上架


 

3.        网络布线


 


 

 


 

4.        IOS导入与升级

设备slot情况:

Slot 0

       Cfa0:/                  #cfa为内置CF卡,容量为252900 KB

       Cfb0:/                  #cfb为外置CF卡,容量为1021808 KB

Slot 1:

       Cfa0:/                  #cfa为内置CF卡,容量为252900 KB

       Cfb0:/                  #cfb为外置CF卡,容量为1021808 KB

情景需求:

  使用TFTP,将IOSSR6600-CMW520-R2420P06-RPE.bin导入到slot 0 cfb0:/

  slot 0 cfb0:/中的IOScopyslot 1 cfb0:/

  内置CF内的IOS不做升级,只把IOS导入到外置CF卡内

  系统启动时,外置CF卡内的IOSmain,内置CF卡内的IOSbackup。只有main IOS无法加载时,才加载backup IOS

  因为有双slot,设备启动时,先加载slot 0内的IOS,当slot 0无法使用时,才使用slot 1

因此系统启动时顺序为:

Master Board(slot0):

 The boot file used this time: cfb0:/sr6600-cmw520-r2420p06-rpe.bin attribute: main

The boot file used this time:cfa0:/main.bin attribute: backup

 

Slave Board(slot1):

 The boot file used this time: cfb0:/sr6600-cmw520-r2420p06-rpe.bin attribute: main

The boot file used this time:cfa0:/main.bin attribute: backup

 

通过3COM TFTP开始导入:

<H3C>cd cfb0:/                 #进入slot0 cfb0:/文件夹

 

<H3C>dir                           #查看当前文件夹的信息

% Device can't be found or file can't be found in the directory

1021808 KB total (1021808 KB free)

File system type of cfb0: FAT16

 

<H3C>system-view           #进入系统试图模式

[H3C]interface g3/1/0      #进入G3/1/0接口

[H3C-GigabitEthernet3/1/0]ip address 1.1.1.1 255.0.0.0        #配置IP地址

[H3C-GigabitEthernet3/1/0]undo shutdown                            #开启接口

 

<H3C>ping 1.1.1.2            #检查设备与TFTP server的连通性

  PING 1.1.1.2: 56  data bytes, press CTRL_C to break

    Reply from 1.1.1.2: bytes=56 Sequence=1 ttl=128 time=2 ms

    Reply from 1.1.1.2: bytes=56 Sequence=2 ttl=128 time=1 ms

    Reply from 1.1.1.2: bytes=56 Sequence=3 ttl=128 time=1 ms

    Reply from 1.1.1.2: bytes=56 Sequence=4 ttl=128 time=1 ms

    Reply from 1.1.1.2: bytes=56 Sequence=5 ttl=128 time=1 ms

  --- 1.1.1.2 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 1/1/2 ms

 

<H3C>tftp 1.1.1.2 get SR6600-CMW520-R2420P06-RPE.bin          #TFTP server上下载IOSslot 0 cfb0:/

  File will be transferred in binary mode

  Downloading file from remote TFTP server, please wait.../

  TFTP: 76378988 bytes received in 135 second(s)

  File downloaded successfully.

 

<H3C>copy cfb0:/sr6600-cmw520-r2420p06-rpe.bin slot1#cfb0:/ #IOSslot 0 cfb0:/拷贝到slot 1 cfb0:/

Copy cfb0:/sr6600-cmw520-r2420p06-rpe.bin to slot1#cfb0:/sr6600-cmw520-r2420p06-rpe.bin?[Y/N]:y

..................................................................................................................................................

%Copy file cfb0:/sr6600-cmw520-r2420p06-rpe.bin to slot1#cfb0:/sr6600-cmw520-r2420p06-rpe.bin...Done.

 

<H3C>boot-loader file cfb0:/sr6600-cmw520-r2420p06-rpe.bin slot 0 main    #设置slot 0boot-loader顺序,即开启加载IOS的顺序,本命令设置cfb0:/(即外置CF卡)内的IOSmain

  This command will set the boot file of the specified board. Continue? [Y/N]:y

  The specified file will be used as the main boot file at the next reboot on slot 0!

 

<H3C>boot-loader file cfa0:/main.bin slot 0 backup

#设置slot 0boot-loader顺序,即开启加载IOS的顺序,本命令设置cfa0:/(即内置CF卡)内的IOSbackup

  This command will set the boot file of the specified board. Continue? [Y/N]:y

  The specified file will be used as the backup boot file at the next reboot on slot 0!

 

<H3C>boot-loader file slot1#cfb0:/sr6600-cmw520-r2420p06-rpe.bin slot 1 main

#设置slot 1boot-loader顺序,即开启加载IOS的顺序,本命令设置cfb0:/(即外置CF卡)内的IOSmain

  This command will set the boot file of the specified board. Continue? [Y/N]:y

  The specified file will be used as the main boot file at the next reboot on slot 1!

 

<H3C>boot-loader file slot1#cfa0:/main.bin slot 1 backup

#设置slot 1boot-loader顺序,即开启加载IOS的顺序,本命令设置cfa0:/(即内置CF卡)内的IOSbackup

  This command will set the boot file of the specified board. Continue? [Y/N]:y

  The specified file will be used as the backup boot file at the next reboot on slot 1!

 

<H3C>display boot-loader             #显示设备的boot-loader信息

Master Board(slot0):

 The boot file used this time:cfa0:/main.bin attribute: main

 The boot file used next time:cfb0:/sr6600-cmw520-r2420p06-rpe.bin attribute: main

 The boot file used next time:cfa0:/main.bin attribute: backup

 Failed to get the secure boot file used next time!

Slave Board(slot1):

 The boot file used this time:cfa0:/main.bin attribute: main

 The boot file used next time:cfb0:/sr6600-cmw520-r2420p06-rpe.bin attribute: main

 The boot file used next time:cfa0:/main.bin attribute: backup

 Failed to get the secure boot file used next time!

 

<H3C>save safely      #保存配置

 

<H3C>reboot             #重启设备

 Start to check configuration with next startup configuration file, please wait.........DONE!

 This command will reboot the device. Continue? [Y/N]:y

#Apr 26 17:19:24:746 2011 H3C DEVM/1/REBOOT:

 Reboot device by command.

 

%Apr 26 17:19:24:746 2011 H3C DEVM/5/SYSTEM_REBOOT: System is rebooting now.

System start booting...

Booting Normal Extend BootWare....

 

****************************************************************************

*                                                                          *

*                    H3C SR66 BootWare, Version 1.36                       *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.

 

Compiled Date       : Sep  8 2010

CPU Type            : MPC8548E

CPU L1 Cache        : 32KB

CPU Clock Speed     : 1000MHz

Memory Type         : DDR2 SDRAM

Memory Size         : 1024MB

Memory Speed        : 400MHz

BootWare Size       : 1024KB

Flash Size          : 4MB

cfa0 Size           : 247MB

cfb0 Size           : 999MB

NVRAM Size          : 128KB

BASIC CPLD Version  : 2.0

EXTEND CPLD Version : 2.0

PCB Version         : Ver.B

 

 

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--cfb0:/sr6600-cmw520-r2420p06-rpe.

bin!........................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

.....................................................

The main application file is self-decompressing.............................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

................

Done!

Extend BootWare Version is not equal,updating? [Y/N]

Updating Extend BootWare.................Done!

BootWare **d,System is rebooting now.

System start booting...

Booting Normal Extend BootWare....

 

****************************************************************************

*                                                                          *

*                    H3C SR66 BootWare, Version 1.37                       *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.

 

Compiled Date       : Oct 14 2010

CPU Type            : MPC8548E

CPU L1 Cache        : 32KB

CPU Clock Speed     : 1000MHz

Memory Type         : DDR2 SDRAM

Memory Size         : 1024MB

Memory Speed        : 400MHz

BootWare Size       : 1024KB

Flash Size          : 4MB

cfa0 Size           : 247MB

cfb0 Size           : 999MB

NVRAM Size          : 128KB

BASIC CPLD Version  : 2.0

EXTEND CPLD Version : 2.0

PCB Version         : Ver.B

 

 

BootWare Validating...

Normal Extend BootWare Version is newer than Backup Extend BootWare!

Begin to ** the Backup Extend BootWare...................Done!

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--cfb0:/sr6600-cmw520-r2420p06-rpe.

bin!........................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

.....................................................

The main application file is self-decompressing.............................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

................

Done!

System is starting...

Starting application at 0x00010000 ...

Mainboard 0 is master.

User interface con0 is available.

 

 

 

Press ENTER to get started.

 

[H3C]display version        #显示IOS版本信息

H3C Comware Platform Software

Comware Software, Version 5.20, Release 2420P06

Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.

H3C SR6608 uptime is 0 week, 0 day, 0 hour, 1 minute

 

Slot 0: RPE-X1 uptime is 0 week, 0 day, 0 hour, 1 minute

 CPU type: FREESCALE MPC8548 1000MHz

 1024M bytes DDR2 SDRAM Memory

 4M bytes Flash Memory

 128K bytes NVRAM

 PCB             Version: Ver.B

 Basic     Logic Version: 2.0

 Extend    Logic Version: 2.0

 Basic  BootWare Version: 1.36

 Extend BootWare Version: 1.37

 [FIXED  PORT] CON              (Hardware)Ver.B,   (Driver)1.0,   (Cpld)2.0

 [FIXED  PORT] AUX              (Hardware)Ver.B,   (Driver)1.0,   (Cpld)2.0

 [FIXED  PORT] MGE0/0/0         (Hardware)Ver.B,   (Driver)1.0,   (Cpld)2.0

 

Slot 1: RPE-X1 uptime is 0 week, 0 day, 0 hour, 1 minute

 CPU type: FREESCALE MPC8548 1000MHz

 1024M bytes DDR2 SDRAM Memory

 4M bytes Flash Memory

 4M bytes Flash Memory

 

 

5.        忙活了一天。标签机使用、模块安装、上架、布线、IOS升级、主备slot IOS boot-loader设置、设备调试、割接前预配导入、所有网点OSPF调测、连通性测试。 技术含量不高,学习到了更多H3C的新命令,鑫哥人不错、rr也很好。耶。so happy,努力摆脱paper IE的身份。

 已同步至 task的微博

路过

雷人
1

握手
1

鲜花

鸡蛋

刚表态过的朋友 (2 人)

发表评论 评论 (7 个评论)

回复 emery 2011-4-28 14:18
赞一个,文档相当详细。task是个传说啊~~~
回复 andersen 2011-5-1 07:53
传说中的Task也开始分享项目了~
不错,写得很详细,技术、生活并重~
回复 xing_8887 2011-10-11 09:32
不错的分享,谢谢!

facelist

您需要登录后才可以评论 登录 | 立即注册

QQ|熊猫同学技术论坛|小黑屋| 网络工程师论坛 ( 沪ICP备09076391 )

GMT+8, 2024-3-29 13:30 , Processed in 0.062274 second(s), 19 queries , Gzip On.

返回顶部